round bale grab Jumbo RBK
– EN
9
6. Operation and use
1. Drive the vehicle to the bale and open the clamp arms by putting the hydraulic system in
‘return’.
2. Keep driving until the bale is located between the two clamp arms.
3. Clamp the bale by operating the hydraulic system.
4. When the bale is clamped, put the hydraulic system back
into ‘neutral’.
5. Lift the bale and drive the bale to the destination.
6. Let the bale sink to the (loading) floor and put the hydraulic system in
‘return’. By doing so,
the hooks open and release the bale.
7. Drive the vehicle away from the bale in reverse.
8. The bale grab is ready to grab and move another bale.
Summary of Contents for Jumbo RBK
Page 2: ......
