29
entered correctly, no error message will be displayed and the time in the upper right corner of the
display will change to the time that you entered.
A new weekday is entered as a number 1 through 7, representing Sunday through Saturday. Enter
1 for Sunday, 2 for Monday, 3 for Tuesday, 4 for Wednesday, 5 for Thursday, 6 for Friday, or 7 for
Saturday. This number should be followed by the ENTER key. If entered correctly, no error
message will be displayed and the new weekday will be displayed in the center of the 2
nd
line on the
display.
If you make a mistake while entering a new date, time, or weekday, the DELETE key may be used
to delete numbers previously entered. If you change your mind about altering the DATE, TIME, or
WEEKDAY after you've selected it, press either the ESCAPE key to go back to the
DATE/TIME/WEEKDAY selection, or the SELECT key to go back to the MAIN MENU. If you press
either of those keys prior to hitting the ENTER key, the change will be aborted.
Note that the system does not automatically account for Daylight Savings Time. If desired by the
operator, such time changes can be made manually using the above procedure.
9) SET PARAMETERS – This display allows the operator to inspect and modify the configurable
operating parameters of the UPS. Only a qualified operator should change these settings since an
error could result in erroneous operation of the UPS.
There are currently two options available from this screen. They include SELECTABLE
PARAMETERS and AUTOMATIC BATTERY TEST SETUP. Section 5.3.5 goes into greater detail
concerning the SELECTABLE PARAMETERS screen and section 5.3.6 goes into greater detail
concerning the AUTOMATIC BATTERY TEST SETUP.
