eXMP-SynqNet Quick Start Guide: Linux
4.
Once the console is activated, use the vi editor to change the network interface settings in the
‘etc/init.d/network’ file. This is a small file, and there are BOLD comments marking the location to
set the desired IP address, subnet mask, broadcast address, and network routing address. Be
sure to write the changes to the file before quitting (:w) and (:q).
Copyright © 2003, Motion Engineering, Inc
10
of
10
DCR 704; rev. A
Summary of Contents for eXMP-SynqNet
Page 1: ......
