Chapter
III
Dex CM3000 15
Full-Digital Control CO2/MAG/MIG Multi-FunctionWelding Machine
Table3-26Parameters of Arc Ending
Function Code
Unit
Adjusting Range
Step Length
Default Value
F2D
0
～
10 Seconds
0.1
0
Spot Welding Time
（
F2E
）
1.
Long press "Function" key more than 3 seconds to enter into internal menu, turn the left knob to F2E.
2.
Turn the right knob to adjust parameters under F2E (shown in table 3-27).
3.
Short press "Function" key to exit internal menu, F29Eparameter settings is completed.
Table3-27 Parameters of Spot welding time
Function Code
Unit
Adjusting Range
Step Length
Default Value
F2E
0
～
10 Seconds
0.1
0
Software VersionQuery (FB0)
To query software version number.
1.
Enter into the internal function, and adjust left panel knob to FB0 (shown in figure 3-7).
Fig.3- 7FB0 Display Interface
2.
Press the "Fn" key, adjust the right panel knob tocheck software version, as shown in figure 3-8.
Fig.3- 8 FB0 Display Interface
Error Record Query
（
FB1
）
The error record is total 200 groups. "F00"means power-on self-testing.
1.
Enter into internal function, and adjust the left panel knob to FB1 (shown in figure 3-9).
2.
Press the "Fn" key, adjust panel right knob to query error record.
Fig.3- 9 Error Query Display Interface
Machine Model Query (FB2)
1.
Enter into internal function, and adjust lest panel knob to FB2 (shown in figure3-10).
Step
Step
Step
Step
