USER MANUAL
Document reference MAODS301/E
SpeedSys300 ODS301 overspeed detection system
Edition 4 - May 2022
5 - 14
Device status tab
COMMISSIONING OF A SPEEDSYS300 ODS301
5.7 Device status tab
The Device status tab and its parameters are shown in
5.7.1 Device status tab – Diagnostic data
The Diagnostic data displayed includes real-time information on different internal parameters
related to the SpeedSys300 ODS301 module’s hardware. For example, the user can observe
the overall supply voltage and temperature (CPU) for the module as well as individual
voltages and currents for the individual (redundant) sensor input channels.
The minimum and maximum values of the latest sampling period are stored, with these
values being updated every sampling period.
The latest measurement values for frequency and acceleration are also displayed.
In addition, firmware version, memory cyclic redundancy check (CRC) and hardware version
information for the module are listed.
Figure 5-6:
SpeedSys300 software – Device status tab
Summary of Contents for vibro-meter SpeedSys300 ODS301
Page 118: ...THIS PAGE INTENTIONALLY LEFT BLANK...
Page 126: ...THIS PAGE INTENTIONALLY LEFT BLANK...
