Megger PFL22M1500 Series, User Manual

Page: 57 / 78

MTDR USER GUIDE
AVTMPFL22M Rev 1 April 2011
47

Select Trace #: This is automatically
selected after the required trace(s) have
been selected. Once selected use “Back” to
return to the main menu options.

Back: Takes the operator out the File sub-
menus back to the “Traces ” tab

Test: Activates the TDR to start taking
pulse Echo measurements. To deactivate
(cancel) depress jog-dial.

Scroll to “ V. Pos” to set the Vertical
Position Select by depressing jog-dial, you
will then be presented with the following
sub-menu options:

Blue: Select to move the Vertical Position
of the Blue Trace.
 Red: Select to move the Vertical position of
the Red Trace.
 Green : Select to move the Vertical position
of the Green trace (where available).

Black
:
Select to move the vertical position
of the Black trace (where available).

Reset: Returns all traces to the centre of
the display.

Back: Takes the operator out the V Pos
sub-menus.
Available on MTDR300