Repair and Warranty
13
The instrument circuit contains static sensitive devices, and care must be taken
in handling the printed circuit board. If the protection of an instrument has been
impaired it should not be used, and be sent for repair by suitably trained and qualified
personnel. The protection is likely to be impaired if, for example, the instrument
shows visible damage, fails to perform the intended measurements, has been
subjected to prolonged storage under unfavourable conditions, or has been exposed
to severe transport stresses.
New Instruments are Guaranteed for 1 Year from the Date of Purchase by the
User.
Note
: Any unauthorized prior repair or adjustment will automatically invalidate the
Warranty.
Instrument Repair and Spare Parts
For service requirements for
Megger Instruments contact:
Megger LImited
or
Megger
Archcliffe Road
Valley Forge Corporate Center
Dover
2621 Van Buren Avenue
Kent, CT17 9EN.
Norristown, PA 19403
England.
U.S.A.
Tel: +44 (0) 1304 502243
Tel: +1 (610) 676-8579
Fax: +44 (0) 1304 207342 Fax: +1 (610) 676-8625
or an approved repair company.
Approved Repair Companies
A number of independent instrument repair companies have been approved for
repair work on most Megger instruments, using genuine Megger spare parts. Consult
the Appointed Distributor / Agent regarding spare parts, repair facilities and advice on
the best course of action to take.
Returning an Instrument for Repair
If returning an instrument to the manufacturer for repair, it should be sent freight
pre-paid to the appropriate address. A copy of the Invoice and of the packing note
should be sent simultaneously by airmail to expedite clearance through Customs. A
repair estimate showing freight return and other charges will be submitted to the
sender, if required, before work on the instrument commences.
