Megger MLDM50 User Manual Download Page 7

10. Measuring Conditions

Measuring Range

The range is limited to 50m.
Use a target plate to increase the measurement range during daylight or if the target has poor reflective properties.

Target Surfaces

Measuring errors can occur when measuring toward colorless liquids (e.g.  water) and clear glass, Styrofoam or similar 

semi-permeable surfaces. Aiming at high gloss surfaces may deflect the laser beam and lead to measurement errors. 

Against non-reflective and dark surfaces, the measuring time may increase.

Maintenance

Do not attempt to repair this meter. It contains no user serviceable parts. Repair or servicing should only be performed 
by qualified personnel.

Cleaning

Should the MLM50 require cleaning, remove the batteries and wipe the instrument down with a damp cloth. Ensure 

the meter is dry before reinserting batteries.
Never use a solvent based cleaner.

WEEE Directive

The crossed out wheeled bin symbol on the instrument is a reminder not to dispose of the product with general waste 

at the end of life.
Megger is registered in the UK as a Producer of Electrical and Electronic equipment. The registration No is; WEE/

DJ2235XR.
Users of Megger products in the UK may dispose of them at the end of their useful life by contacting B2B Compliance 

at www.b2bcompliance.org.uk or by telephone on 01691 676124.
Users of Megger products in other regions should contact their local Megger office or distributor.

Warranty (3 years)

This product is warranted to the original purchaser against defects in material and workmanship for three years from 

the date of purchase. During this warranty, the manufacturer will either replace or repair the defective unit, subject to 

verification of the defect or malfunction.
This warranty does not cover fuses, disposable batteries, or damage from abuse, neglect, accident, unauthorised repair, 

alteration, contamination, or abnormal conditions of operation or handling.
Any implied warranties arising out of the sale of this product, including but not limited to implied warranties of 

merchantability and fitness for a particular purpose, are limited to the above. The manufacturer shall not be liable for 

loss of use of the instrument or other incidental or consequential damages, expenses, or economic loss, or for any claim 

or claims for such damage, expense or economic loss. Some states or countries laws vary, so the above limitations or 

exclusions may not apply to you.

Battery Disposal

The batteries in this product are classified as Portable Batteries under the Batteries Directive. Please contact either 
Megger Ltd, your local Megger office or distributor for instructions on the safe disposal of these batteries. Megger is 
registered in the UK as a producer of batteries. The registration number is BPRN01235.
For further information see www.megger.com

www.megger.com

7

MLM50 Laser Distance Meter

Summary of Contents for MLDM50









Reviews: