Soft-Touch
buttons
√
Dust Protect/Splash proof
IP54
History measurement records
20
Operating Temperature
0°C to 40°C (32°F to 104°F)
Storage Temperature
-10°C to 60°C (14°F to 140°F)
Batteries
2 x AAA 1.5V
Battery Life
up to 5,000 measurements
Auto laser switch-off
after 30 seconds
Auto instrument switch-off
after 3 min
Dimension
135 x 33 x 24mm
Weight
80g
* Use a target plate to increase the measurement range during daylight or if the target has poor reflective properties!
** in favorable conditions (good target surface properties, room temperature) up to 10 m (33 ft). In unfavorable
conditions, such as intense sunshine, poorly reflecting target surface or high temperature variations, the deviation in
distances above 10 m (33 ft) can increase by ± 0.15 mm/m (± 0.0018 in/ft).
Product manufactured in China
7. Inserting or Replacing Batteries
i) Remove the rear battery compartment lid.
ii) Insert 2 x AA batteries, observing their correct polarity.
iii) Replace the rear battery compartment lid.
Replace the batteries when the
symbol flashes permanently in the display.
It is recommended to use alkaline batteries only.
Batteries should be removed prior to any long period of non-use.
8. Error Codes
Code
Cause
Corrective measure
208
Received signal too weak. Measurement
time too long. Distance >50M
Use target plate.
252
Temperature too high
Cool instrument down
253
Temperature too low
Warm up instrument
255
Hardware error
Switch on/off the device several times.
If the error persists, please contact your
local service center.
9. Labelling
www.megger.com
6
MLM50 Laser Distance Meter