6. Functions
Area Measurement
Pressing the
button once will start the area measurement function.
Press the
button to take the first length measurement (e.g. length).
Press the
again to take the second length measurement (e.g. width).
The result of the area measurement is displayed in the third summary line of the display. The two individually measured
values are displayed in lines 1 and 2.
Volume Measurement
By pushing the Unit button twice, it will start the volume measurement function.
Press the
button to take the first length measurement (e.g. length).
Press the
again to take the second length measurement (e.g. width).
The result of the area measurement from the values already measured is displayed in the summary line.
Pressing
takes the third distance measurement (e.g. height). The value is displayed in the second line.
The resulting volume measurement is displayed in the third summary line. The last two measured values are displayed in
lines 1 and 2.
Historical Storage
The previous 20 measurements or calculated results can be recalled on the display, in reverse order (newest first). To
enter memory mode, quick press this button to cycle through the stored results. The memory location is shown at the
top of the display.
You can clear all stored records by pressing MEM and CLR buttons simultaneously when in historical storage mode.
6. Technical Specifications
Range
0.05 to 50 m (0.2 to 164 ft) *
Measuring accuracy up to10m
Typically: ±1.5 mm (±1/16 in)**
Standard
deviation
2
σ
Measuring units
m, in, ft
Laser Class
Class II
Laser Type
650 nm, <1mW
Smallest unit displayed
1mm
Area, Volume Calculations
√
Built-in spirit level
√
Continuous Measurement
√
Min/Max Distance Tracking
√
Backlit
display
√
www.megger.com
5
MLM50 Laser Distance Meter