Changing the batteries in
the transmitter
The batteries in the transmitter have to be replaced as soon as the red LED battery
indicator starts to blink.
Should this occur while the user is busy locating a line with the receiver, he/she will be
informed of the weak batteries via the reception signal:
Type of
signal
Normal signal
Signal when batteries are
weak
Before changing the batteries, any connection leads have to be disconnected from
the transmitter. Only batteries of the same type and size as recommended (see
Technical Data) are to be used. There is danger of explosion if batteries are
mishandled or incorrectly replaced.
In order to change the six batteries, both screws on the back of the transmitter must
be (e.g. with the aid of a coin) turned through ¼ turn (1) and the battery tray must be
pulled (2). Please note that all the batteries are fitted in the same direction.
Changing the floor cap on
the receiver
The plastic floor cap, which prevents the tip of the receiver from being damaged, can
be easily replaced with the aid of a pointed object (e.g. screw driver). Replacements
can be ordered through the Megger sales team.
CAUTION
1
2
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
