2.5 Safety, Hazard and Warning Symbols on the Instrument
This paragraph details the various safety and hazard icons on the instrument’s outer case.
Icon
Description
Warning: High Voltage, risk of electric shock
Caution: Refer to User Guide.
Equipment complies with current EU directives.
Equipment complies with current ‘C tick’ requirements.
Do not dispose of in the normal waste stream.
Equipment protected throughout by double insulation.
IP54
IP rating
2.5.1 Warning Icons
This paragraph details the warning icons that can show on the display.
Icon
Warning
Description
External Voltage Warning
If an external voltage is applied between the terminals and the
instrument is set to ON, the external voltage warning will flash
on the display. This is a warning that the item under test is live,
it might be dangerous so testing is disabled. The external voltage
warning message will flash if more than 5 V potential difference
is applied between the voltage terminals and the current
terminals. This warning will not show if all terminals are at the
same external voltage.
NOTE: The warning will not operate if the instrument is set to OFF.
Internal Error Warning
Internal Error Warning. To clear the error, switch the instrument
OFF and then back ON. Contact
Megger
if this does not clear
the error.
i
Read the User Guide
Refer to the user guide if this message shows.
Safety Warnings
www.megger.com
DLRO2
7
