5. Click the
Add
button. The Create New Test ID dialog box appears.
6. If an existing Test ID is close to what you will need, ensure that it is selected in the
Test ID
field
then click on the
Copy Current Test ID
radio button. Otherwise, click on the
Add Blank Test
ID
radio button to start from scratch.
7. Give the new Test ID a descriptive name and choose a target motor voltage class from the drop
down list then click on
OK
Figure 8. Create New Test ID dialog box.
8. You can further modify the Test ID by selecting the desired tests to be performed via the
On/
Off
buttons
Figure 9. Selecting tests to perform, and controls for configuring or viewing test parameters.
Preparing For Testing
Baker AWA -IV Static Motor Analyzer
www.megger.com
8
