Electrical and Calibration Standards
All Megger Baker Instruments standards are either certified directly or are traceable to certification by the National
Institute of Science and Technology, formerly the United States Bureau of Standards. To obtain other information
concerning calibration, contact Megger Baker Instruments.
Equipment Return
Before returning any equipment or components to Megger Baker Instruments, the following steps should be taken:
1. Call the Megger Baker Instruments Fort Collins service department at (970) 282-1200. Give the service representative
a full description of the reason for the return, including any diagnostic or troubleshooting actions taken. Please
provide the specific model and serial number of the instrument, along with the software version used.
2. Equipment returned to Megger Baker Instruments must be packaged in such a manner that it will reach the
factory undamaged from transit.
3. For non-warranty repairs, Megger Baker Instruments service will provide a cost estimate for your approval prior to
your shipping.
Megger Acquisition of Baker Instruments
Megger Group Limited, a manufacturer of electrical test equipment and measuring instruments for power
applications, acquired the Baker Instruments business from SKF Group in August of 2018.
For over 50 years, the Baker Instruments business has led the electrical motor testing industry and has a recognized
leading brand and position in this area. As such, legacy products will carry the Baker Instruments or SKF brands,
which will be supported by Megger moving forward.
Trademarks
Megger® is a registered trademark of Megger Group Limited.
EAR+™, Pulse-to-Pulse EAR+™, and Line-to-Line EAR+™ are trademarks of Megger Group Limited.
PowerDB™ is a trademark of PowerDB, Inc., a subsidiary of Megger Group Limited.
Realm™ is a trademark of MongoDB, Inc.
Android™ and the Android logo are trademarks of Google LLC.
All other trademarks are the property of their respective owners.
EU Declaration of Conformity
Megger Baker Instruments declares that the equipment described below complies with all applicable health and
safety requirements of the Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, and ROHS Directive
2011/65/EU.
For complete Megger Baker Instruments EU declarations of conformity visit
https://megger.com/company/about-us/
legal/eu-dofc
www.megger.com/baker
Megger Baker ADX Quick Reference Guide
ii
