Tests: Long leads mode
www.megger.com
DLRO2 and DLRO2X
35
C and P indicators show red background with
for no
continuity or green background with
for good continuity.
8.1.1 For manual mode
Proceed when both show green background with
.
3. To start the test press the TEST button.
During the test, continuity indicators will fade.
The dashes (or an old result) will flash until a new result is
displayed.
On the secondary display dashes or previous results will flash
until a new result is ready.
For a single test the result is displayed constant in the main
field. No latest results are displayed in the secondary field
unless multiple tests have been made in this sequence.
If continuity is maintained, pressing the TEST button will start
a new test.
8.1.2 For auto mode
In auto-start mode the instrument will start the test when
continuity is established. If both C and P continuity is made
before the test mode is selected, the continuity flags will be
shown in grey – this means that the user must disconnect and
reconnect or press the TEST button to start the test.
