silver plated 2m/7ft
242005-7
Duplex 3.8 cm (11⁄2”) Kelvin Clips. (2)
2m/7ft 242006-7
5.5m/18ft 242006-18
9m/30ft 242006-30
Single Leads
Single handspikes (2) for potential measurement.
2m/7ft 242021-7
5.5m/18ft 242021-18
9m/30ft 242021-30
Current clips (2) for current connections.
2m/7ft 242041-7
5.5m/18ft 242041-18
9m/30ft 242041-30
Note: For more details of optional lead sets see separate test lead datasheet
DLRO_TL_DS_en_V01.pdf
Test leads fitted with in-line connector:
Add the part numbers of the complete lead sets and refer customers to the
test lead data sheet for the individual parts.
For detailed information on connecting lead accessories refer to the supplied
“accessory important information sheet” (DLROTestLeads--2007-431_UG_
EN-DE-FR-ES-IT_V02)
The instrument circuit contains static sensitive devices, and care must be
taken in handling the printed circuit board. If the protection of an instrument
has been impaired it should not be used, and be sent for repair by suitably
trained and qualified personnel. The protection is likely to be impaired if, for
example, the instrument shows visible damage, fails to perform the intended
measurements, has been subjected to prolonged storage under unfavourable
conditions, or has been exposed to severe transport stresses.
New Instruments are warranted for 12 months, from the Date of Purchase by
the User.
Note: Any unauthorised prior repair or adjustment will automatically
invalidate the Warranty.
Instrument Repair and Spare Parts
For service requirements for Megger Instruments contact:-
Megger Limited
Archcliffe Road
Dover
Kent, CT17 9EN.
England
Tel: +44 (0) 1304 502100
Fax: +44 (0) 1304 207342
or
Megger Valley Forge Corporate Centre
Van Buren Avenue
2621 Norristown, PA 19403
U.S.A
Tel: +1 (610) 676-8579
Fax: +1 (610) 676-8625
or an approved repair company.
16
Repair and Warranty
or Megger
Bronze Way,
Dallas, Texas, TX75237-1019
U.S.A.
Tel: +1 (800) 723-2861
