gone through 3 or 4 charge and discharge cycles. After that, you should be attaining
full flight duration times.
NEVER LEAVE A CHARGING BATTERY UNATTENDED!!
Always let the flight pack
cool before recharging.
• Connect the battery to the wall charger.
• Note: Only use a charger that is approved for use with this battery
• Plug the charger into an electrical outlet
• Children must have parental supervision during the charging process
• Charge the battery for 1-2 hours.
• Always monitor the charging process. The flight pack should become good and
warm but do not let it become extremely hot!
DO NOT OVERCHARGE THE
BATTERY
. Use extra caution when touching the battery because it may become
very hot.
4. Attaching the Main Wing
• Place the main wing onto the fuselage with the polyhedral design curving upwards
and wingtips pointing towards the v-tail.
• Make sure the small arrows imprinted into the wing are centered over the fuselage
• Wrap the Wing Bands around the fuselage and the wing in an “X” pattern and then
a “II” pattern as shown
5. Installing the Flight Pack into the Fuselage
• Open the battery hatch on the front of the Sky Vector
fuselage
• Make sure to leave all foam pieces inside the fuselage,
this ensures proper placement of the flight pack
• Place battery into fuselage with the wide section of the
battery towards the front as shown
• Attach the battery connector with the connector inside
the fuselage
• Close battery hatch cover when done
Flight Pack Placement
Wing Band Placement
Center Wing on Fuselage
