![background image](http://html1.mh-extra.com/html/megasat/shipman-kompakt/shipman-kompakt_user-manual_1765107016.webp)
5. Firmwareupdate
10
11
ENGLISH
ENGLISH
6. Troubleshooting
There are a number of common issues that can affect the signal reception quality or the
operation of the antenna. The following sections address these issues and potential solutions.
1. Copy the firmware file (eg.
CONT_D_W.bin
) to a USB stick. The file must be located
in the main directory of the USB stick (without subfolder).
2. Make sure the control unit is turned off and then insert the USB stick on the front
panel.
3. Press and hold the SET button. Now switch on the control unit at the power switch.
4. The firmware file is checked and the MODE LED is lit.
(You can now release the SET button).
5. If the check was successful, the update process is started and all LEDs on the front
panel light up one after the other. The update process takes about 10 seconds.
6. After successful updating, the control unit will restart automatically.
1. Check again all the cable connections have been made correctly.
- Connection between the power and control unit
- Connection between the control unit and antenna.
2. Check the power cable for damage.
3. Check the polarities on the battery (+/-).
1. When the antenna makes untypical noises.
- Turn the unit off and then on again.
If the problem has not been resolved, please contact your dealer.
1. If the system is not properly wired, it will not work properly.
- Contact your local dealer for assistance if you are planning to install the
antenna properly.
1. Satellite signals are blocked or impaired by obstacles. Ensure that a clear line of
sight is guaranteed.
2. Check the control unit and, if necessary, perform a firmware update.
A. No function when you power on the control unit
C. Mechanical problems
D. Other problems
B. The selected satellite can not be found
Note
• If the control unit does not recognize the USB stick, The MODE, TRACKING and
LOCK LEDs flash 6 times in succession.
• If the update failed, all satellite LEDs flash until the control unit has switched off
independently.