ENGLISH
ENGLISH
02
03
Table of contents
Safety Instructions
Caution
– Improper handling by unqualified personnel can cause serious
damage to this equipment. Unqualified personnel who tamper with this
equipment may be held liable for any resultant damage to the equipment.
Note
– Before you begin, carefully read each of the procedures in this ma-
nual. If you have not performed similar operations on comparable equip-
ment, do not attempt to perform these procedures.
Classic / Premium
Professional
Delivery
• 1x Powersplitter (Current injection)
• 1x Supply cable
• 1x Reflection horn
• 1x Rubber ring
• 1x USB to Serial cable (optional)
• 1x Power supply (for vehicles)
(12 V in / 24 V out)
• 1x Control unit
• 1x Supply cable
• 1x Reflection horn
• 1x Rubber ring
• 1x USB to Serial cable (optional)
• 1x Power supply (for vehicles)
(12 V in / 24 V out)
Do not handle antenna “dish”.
Hold antenna by body “only”.
Packaging
1. Remove tape from packaging (Do not use knife)
2. Remove antenna gently from packaging
3. Remove Styrofoam parts from the antenna
!
1. Introduction
Safety instructions ................................................................ 02
Delivery ........................................................................................ 03
Packaging ................................................................................... 03
Designations of outdoor unit ........................................ 04
Designations of current injection ............................... 05
2. Installation
Installation ................................................................................. 06
Connecting the antenna unit ........................................ 07
Startup ......................................................................................... 08
View the LCD display ........................................................... 09
Examples for locating the satellite .............................. 10
Set values for European capitals .................................. 10
3. Troubleshooting
................................................................... 13
4. Updating the Firmware
................................................... 14
5. Footprint
..................................................................................... 16
6.Specifications
........................................................................... 17