![background image](http://html1.mh-extra.com/html/megasat/ip-server-3/ip-server-3_quick-manual_1765176031.webp)
4. Main menu
13
ENGLISH
Single LNB
1. Connect signal input with
RF4
.
2. In the menu „Preferences -> Server Settings -> LNB Configuration“ you set
One
User per RF
.
3. Click „Apply“ and restart the server. Now you can use one SAT>IP client on the server.
Twin LNB
1. Connect signal input with
RF3
and
RF4
.
2. In the menu „Preferences -> Server Settings -> LNB Configuration“ you set
One
User per RF
.
3. Click „Apply“ and restart the server. Now you can use two SAT>IP client on the server.
Multiswitch with DiSEqC
1. Connect signal input with
RF1
to
RF4
.
2. In the menu „Preferences -> Server Settings -> LNB Configuration“ you set
One
User per RF
.
3. Click „Apply“ and restart the server. Now you can use four SAT>IP client on the server.
Quad LNB or Multiswitch without DiSEqC
1. Connect signal input with
RF1
to
RF4
.
2. In the menu „Preferences -> Server Settings -> LNB Configuration“ you set
Quad
.
3. Click „Apply“ and restart the server. Now you can use four SAT>IP client on the server.
Quattro LNB
1. Connect signal input with
RF1
to
RF4
.
- RF1 (Horizontal - Low)
- RF2 (Horizontal - High)
- RF3 (Vertical - High)
- RF4 (Vertical - Low)
2. In the menu „Preferences -> Server Settings -> LNB Configuration“ you set
Quattro
.
3. Click „Apply“ and restart the server. Now you can use eight SAT>IP client on the server.
LNB Configuration