Operation
ENGLISH
12
Multi-Satellites Scan: Press OK to select satellites, then press blue to pop the menu of scanning
setting. After Configuring like single satellite scan, press OK to start multi-satellites scan.
Blind Scan: First scan the band to get the transponders which can be locked. After gathering all
Transponders, Scan the transponders one by one to get the programs.
DB Managment: Backing up your channel list or to load list.
Unicable Konfiguration:
Unicable enables the delivery of broadcast programming to multiple users over a single coaxial
cable. It should work with Unicable LNB or SaTCR equipment. Set the Unicable ON, and select a
channel which isn‘t occupied by other users. Dish setup with Unicable When unicable activated,
the DiSEqC1.0, DiSEqC1.1, DiSEqC1.2,DiSEqC1.3 are disabled. Set Pos A/B for satellites if the equip-
ment can support.
Time Setting
To access the Menu, press MENU then select [Time]. The Menu provides options to adjust the time
settings. Press UP/DOWN to select an option and press RIGHT/LEFT to adjust the settings. Press
EXIT to exit the menu.
1. Time Auto: update time with the stream time, or NOT.
2. Time Zone: Select the Time Zone Offset.
3. Date: show and set the system date.
4. Time: show and set the system time.
5. Sleep: If this setting is off, this function does not work. If this setting is not off, a message will pop
up after your preferred time to inform you, that the device will go in to sleep mode. This message
will appear under no any operation. Auto-off function can be set in a time period at 0-12 hours.
Standard setting is off. Press STANDBY button to exit sleep/auto-off mode.
Optionen
To access the Menu, press MENU and select [Option]. The menu provides options to adjust the
OSD Language, Subtitle Language and Audio Language. Select an option and press RIGHT/LEFT to
adjust the setting. Press EXIT to exit the Menu.
1. OSD Language: Select an OSD language.
2. Audio Language: Select the preferred audio language for watching TV channels. If the language
is not available, the default program language will be used.
3. Subtitle Language: Select the preferred subtitle language.
4. Digital Audio set output mode of Digital Audio.
5. Banner Time set the period of banner auto disappearing.