MegaPoints Controllers System2 Starter Kit, User Reference

Page: 23 / 33

MegaPoints Controllers System2 Panel Controller User Reference Revision 1
megapointscontrollers.co.uk Page 23
Reset to defaults
This will reset most of the board values to defaults. Observe the message in the Status Log (2). You
have reset to defaults and the default values are live, however will revert back to previous settings
upon a reboot unless specifically saved. Particularly useful for testing and reverting.
Resetting to defaults changes the following:

EasyConfig 1a is selected.

V-Ports including trigger and feedback set for 1a (above).

Type reset to “Points”.

Reversed checkbox cleared.
The following are not changed:

Board location description (upper left of page).

CAN ID

IP Address

Wi-Fi configuration

Speed