MegaPoints Controllers
System2 Panel Controller User Reference
Revision 1
megapointscontrollers.co.uk
Page 15
Ports. This will preselect compatible addresses with other starter kit driver boards and get you up
and running quickly.
Refer to the screen shot below for a detailed explanation. Numbers in red circles relate to paragraph
number of text.
3
To change the EasyConfig for this board, select the board from the drop down.
1,2
Upon mousing over the drop down box (3) you will observe the greyed out
values in the green highlighted areas. This shows the values that are about to
be changed.
4
The EasyConfig board number 1 – 10.
5
The first V-Port address of the configuration.
