30
manufacturer.
-
Check that the pump has not suffered any damage during transport or storage.
-
Carefully clean the suction and delivery inlets and outlets, removing any dust or
other packaging material that may be present.
-
Check that the electrical data corresponds to those indicated on the date plate.
-
Always install in an illuminated area.
-
Install the pump at a height of min. 80 cm.
POSITIONING, CONFIGURATIONS AND ACCESSORIES
NOTE
In the case of installation in the open air, proceed to protect the pump by providing a
protection roof.
The pump can be installed in any position (pump axis vertical or horizontal)
The pump must be secured in a stable way using the holes on the bed of the motor and
vibration damping devices.
ATTENTION
THE MOTORS ARE NOT OF THE ANTI-EXPLOSIVE-TYPE. DO NOT install them
where inflammable vapours could be present.
NOTE
The broad range of pump accessories make it suitable for many different uses,
installations and applications. The supporting base can be positioned in different
ways.
NOTE
The pump can be installed in any position (pump axis vertical or horizontal).
ATTENTION
It is the responsibility of the installer to provide the necessary line accessories to
ensure the correct and safe operation of the pump. The accessories that are not suitable to be used with the
previously indicated material could damage the pump and/or cause injury to persons, as well as causing
pollution.
ATTENTION
To maximize performance and prevent damage that could affect pump operation,
always demand original accessories.
