27
ATTENTION
The curve refers to the following operating conditions:
Fluid: AUS32 – DEF- ADBLUE ©
Temperature: 20°C
Suction conditions: The pipe and the pump position relative to the fluid level is such that a low pressure of 0.3 bar
is generated at the nominal flow rate. Under different suction conditions higher low pressure values can be
created that reduce the flow rate compared to the same back pressures values. To obtain the best performance,
it is very important to reduce loss of suction pressure as much as possible by following these instructions:
-
Shorten the suction pipe as much as possible
-
avoid useless elbows or throttling in the pipes
-
keep the suction filter clean
-
Use a pipe with a diameter equal to, or greater than, indicated (see installation).
ELECTRICAL DATA
SAFETY WARNINGS AND PRECAUTIONS
Important precautions
To ensure operator safety and to protect the pump from potential damage, workers must be fully acquainted
with this instruction manual before performing any operation.
Symbols used in the manual
The following symbols will be used throughout the manual to highlight safety information and precautions of
particular importance:
ATTENTION
This symbol indicates safe working practices for operators and/or potentially exposed persons.
WARNING
This symbol indicates that there is risk of damage to the equipment and/or its components.
This symbol indicates useful information.
FIRST AID RULES
Contact with the product
In the event of problems developing following EYE/SKIN CONTACT, INHILATION or INGESTION of treated
product, please refer to the SAFETY DATA SHEET AUS32/DEF/AD-BLUE
Persons who have suffered electric shock
