Fig. 4
2. Bottom Panel Assembly
a) Loosen but do not remove the screws that were pre-
assembled on the side of the Bottom Panel (B), align the
holes on the Cart Leg Front Left (F) and Cart Leg Rear
Left (G), then place the cart legs onto the screws that
were loosened in the Bottom Panel (B). As shown in
F
G
were loosened in the Bottom Panel (B). As shown in
Fig. 4.
b) Tighten the screw from outside to inside, there is a hole
in the outside of the cart leg. As shown in Fig.4.
Hole
c) Repeat step 2a and 2b to attached the right legs to the
Bottom Panel (B), make sure all screws are tight.
B
Fig. 5
E
3. Front Panel Assembly
a) Loosen but do not remove the screws which were pre-
assembled on the cart legs, align the holes of the
bottom Front Panel (E) with the screw in the legs, then
place the Front Panel (E) onto the screws in the cart
legs. As shown in Fig. 5.
b) Tighten the screws that were loosened in step 3a.
Note: Flat facing side of the Front Panel (E) should
faces out.
c) Repeat steps 3a and 3b to assemble the top Front
Panel (E). As shown in Fig.5.
E
14
