Cleaning and maintenance
Cleaning:
Clean the front glass of the fixture with soap and warm water, never clean with strong soluble deter-
gents.
Installation
M
aintenance:
The operator has to make sure that the unit is operating safely and has the installa-
tions and electronics checked by an expert every 2 years.
The following points have to be considered during the inspection:
1) All screws used for installing the device or part of the device have to be tightly connected and must not be corroded.
2) There must not be any deformations on the housing, fixation and installation spot.
3) The electronic power supply cables must not show any damages, material fatigue (e.g. porous cables) or sediments.
Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any
Note:
There is no serviceable parts inside the device. Maintenance and service operations are to be carried out
by authorized dealers.
Should you have further questions , please contact your dealer.
8
Parts List
MEA-APV-12-12
Power Supply
Installing the fixture
Caution!
1. The installations must be carried out by an authorized dealer or trained profes-
sional.
2. Unit may cause severe electrical injures if you have doubts concerning the safety
do not install.
When installing a unit it is very important that you follow common safety procedures. Installing requires extensive experi-
ence including but not limited to calculating voltage loads, material being used and periodic safety inspections. If you
lack these qualifications, do not attempt the installation yourself, instead use a professional electrician.
When installing the controller please make sure all safety rules are followed and it is installed in a appropriate housing.
Installation should be checked at least one time a year by a skilled person.
Summary of Contents for XWITCH
Page 2: ......
