4
Main Power Connection
Caution!
1.
Do not connect fixture to a dimmer system.
2.
This unit has Auto switching power supply. It will respond to 110V or 220V automatically
3.
This unit must be earthed. (electronically grounded)
4.
Replace fuse only with the specified type and rating.
The occupation of the connection
-
cable is as follows:
DMX
-
512 Connection
The fixture is equipped with 5 pin XLR Sockets and RJ45 for DMX input and output. The sockets are wired in parallel.
Only use a shielded twisted pair cable designed for RS
-
485 and 5 pin XLR or RJ45 plugs and connectors in order to
connect the controller with the driver or the driver with another.
DMX 5 Pin —Input / Output Or RJ45 8 Pin—
In / Output
1. Ground
2. Signal (
-
)
3. Signal (+)
1
3
2
4
5
This fixture is equipped with an electronic power supply that will let the unit operate from 100V to 240V from 50Hz to 60Hz
Cable (USA)
Cable (EU)
Pin
110V
Black
Brown
White
Green
Light Blue
Yellow/Green
Live
Neutral
Ground
L
N
220V
L
L
RJ45 8 Pin
1. Signal (+)
2. Signal (
-
)
7&8. Ground
1
2 Signal
-
3 N/A
4 N/A
5 N/A
6 N/A
7 Ground
8 Ground
12V Sensor By
-
pass
Once the Deco Drive CV4 receives a DC 12V input signal all dimmer channels will go to a full position and by pass DMX
Control. Once 12V signal is removed the DMX Control will be reengaged.
12V input signal
