6
Control Board
System Mode
( DMX)
Port Mode DMX Address
(01) (01)
(001)
DMX:
DMX mode allows you to set the DMX
operational mode: For each output port you can
select Mode of operation and DMX start address.
Press
Enter
use the
Up / Down
button to select
the output port press
Enter
once selected. Mode
function will then be highlighted, use the
Up /
Down
button to select your operating mode.
Each lighting fixture will have a different operat-
ing mode. Consult the fixture
’
s manual or fixture
label to determine the operating mode. Press
Enter
, DMX Address will then be highlighted,
use the
Up / Down
button to select the fixtures
start address. Start address should match your
controller
’
s start address channel. Press
Enter
to confirm your settings.
Port Mode DMX Address
(02) (01)
(001)
Port Mode DMX Address
(03) (04)
(004)
Port Mode DMX Address
(04) (07)
(210)
System Mode
( Auto)
Prog 01
(ST Color 1)
Auto:
Auto mode allows you to access the
pre
-
built auto function for control. Press
Enter
use the
Up / Down
button to select the pre pro-
gram fixture look. Programs 01 to 18 are single
scene programs and programs 19 to 21 are
chase programs. Press
Enter
once you have
decided on the scene or chase. For Programs 1
-
18 use the
Up/Down
buttons to adjust fixture
dimmer output. For programs 19
-
21 use the
Up/
Down
buttons to adjust the chase speed. Press
Enter
to confirm the fixture setting.
Prog 18
(ST Color 18)
Prog 19
(Step Chace)
Prog 20
(Color Fade)
“ “
Prog 21
(Strobe)
Prog 22
(Chasing)
Prog 01 Dimmer
(000)
Prog 18 Dimmer
(000)
Prog 19 Speed
(000)
Prog 20 Speed
(000)
“ “
Prog 22 Speed
(000)
Prog 22 Speed
(000)
System Mode
( Manual)
Red
(000)
Green
(000)
Blue
(000)
White
(000)
Manual:
Manual mode allows you to man-
ually control the intensity of all 4 ports simultane-
ously via the control display without the need for
a DMX controller. Press
Enter
to select the dim-
mer output you would like to adjust . Use the
Up/
Down
keys to select the dimmer intensity. There
is many Deco Fixtures that can be controlled via
a Deco Driver. Please Consult your Deco Light-
ing fixtures Manual to see what values are ac-
tive. Press
Enter
to confirm the setting.
Lock Display:
The display for the Deco Driver factory setting is lock screen function to unlock the display press and hold
the
Menu & Enter
for 3 seconds
