MegaLife ML-PC10AO-K5NNA1A, Owner'S Manual, Page: 16 / 30

●
1.
Drain Water
12
Install Power cord Hooks
NOTE
●
Remove the continuous drain cap 1 by turning it
counter clockwise then remove the rubber stopper
2 from the spout.
2
Drain water from the middle drainage port.
Drainage method
Wind the power cord around the power cord
hooks.
Water can be automatically emptied into a floor drain
by attaching 14mm inner diameter hose (not included).
the unit with screws (the direction of power cord
● Assemble the power cord hooks at the back of
hooks is as shown in following fig).
Remove the rubber plug of the bottom drainage
port to drain water.
After draining, insert the rubber plug.
Press ON/OFF button to restart.
To reach the maximum performance, it is not
recommended to drain water, during Cool mode.
It is recommended to use the middle drainage port
to drain water, during Dry mode.
It is recommended to use the bottom drainage port
to drain water, during Heat mode.
To drain water from the bottom drainage port when
the display shows "H8".
1
Drain water from the bottom drainage port.
Turn off the unit and pull out the plug from the
socket.
Place a water container under the bottom drainage
port, or move the machine to a place where it can
drain.
power cord hooks
screws
direction of power cord hooks is downward
direction of power cord hooks is upward
Bottom drainage port