03282008
4 chirps
Disarm / Intrusion
12 flashes
Car Locator
6 chirps
Car Locator
E. ALARM OPERATING CONDITION:
Siren
Parking Light
LED
Doors
Starter disable
Pager
1. Arming
1 Chirp
1 Flash
Slow flash
Locking
On
2. Disarming 2 or 4 Chirps
2 or 3 Flashes
Off or Fast flash
Unlocking Off
3. Trigger
Alarming
Flashes
Slow flash
On
On
4. Panic
Alarming
Flashes
Slow flash
Locking
On
F. ACTIVE ARMING – LOCK & ARM:
1. Press
button on transmitter.
2. The siren will chirp once and parking light will flash once indicating that the system is now armed. The
vehicle doors will lock upon arming when interfaced with the security system.
AJAR WARNING:
If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar. (See Feature
“I
-
3
Programming)
SILENT ARMING / DISARMING:
Press the
¾
or
8
buttons at same time on the transmitter to arm or
disarm your security system. No chirp sound will be heard. Arm / disarm confirmation will be through the
vehicles parking lights only.
SHOCK SENSOR BY-PASS:
Pressing the
button on the transmitter twice within 3 seconds will arm the
security system and bypass the shock sensor connected to 4 pin plug. The system will chirp one additional
time to confirm sensor bypass mode was activated. The sensor bypass feature is programmed to activate for
one arming cycle only. The security system will return to normal operation during the next arming cycle.
HIDDEN ALARM FUNCTION:
Press the
/ AUX
button first; within 3 seconds press the
button to
activate the hidden alarm function. The security system will arm and with “Hidden Alarm Function”. The siren
/ horn will be silenced even if the sensor is triggered in the armed status.
G. PASSIVE ARMING:
(See Feature
“II
-
2”
Programming)
Active arming / disarming is controlling your security system via the remote transmitter. This security system
is equipped with an optional Passive Arming feature, which allows the security system to arm 30 seconds
after the last door is closed. Operation is as follows.
1. Turn the ignition to the “OFF” position and exit the vehicle.
2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you reopen any
door / hood / trunk, the security system LED will stop flashing. It will begin flashing again once the vehicle
entrances are all closed.
3. After the 30-second timer has elapsed, the security system will automatically “ARM”. The siren will chirp [1]
time and the parking lights will flash [1] time.
PASSIVE DOOR LOCKING:
(See Feature
“II
-
2”
Programming)
The vehicle doors will automatically lock after passive arming cycle has been completed.
H. ACTIVE DISARMING – UNLOCK & DISARM:
1. Press
button on the transmitter.
2. The siren will chirp twice and parking light will flash twice to indicating that the security system is now
disarmed. The vehicle doors will unlock disarming when interfaced with the security system.
TAMPER DISARMING
: If alarm triggered, upon disarm the system, siren chirps 4 times, parking lights flash
3 times.
TWO STEP DOOR UNLOCK
: (See Feature
III – 2
Programming.) This feature will independently unlock the
driver door only when disarming the security system. Pushing the
button on the transmitter a second time
within 3 seconds will unlock the entire vehicle.
AUTOMATIC RE-ARM
(See Feature
“
I
-
2”
Programming): If this feature is selected, the security system
will automatically re-arm itself 60 seconds after disarming with remote transmitter. Automatic rearm will
cancel if any door is opened before the 60 second timer has elapsed.
I. DISARMING WITHOUT A TRANSMITTER
OVERRIDE THE ALARM WITHOUT PASSWORD PIN CODE:
(Factory Default Setting)
The Override function may be used if the remote transmitter is lost or inoperative.
1. Enter the vehicle and turn the ignition switch to 'ON’ position. (Alarm will sound.)
2. Within 10 seconds push and release the valet switch
The alarm will stop sounding and enter the disarm mode. You can now start and operate the vehicle
normally.
OVERRIDE THE ALARM WITH PASSWORD PIN CODE:
Unlike valet switch that can be easily found and defeated, this security system allows the consumer to
program a password pin code, offering a higher level of security.
1. Enter the vehicle and turn the ignition switch to 'On’ position. (Alarm will sound.)
MEGA 470/474; VS 465/474L
9
