5
Cleaning Instruction Prior To First Distillation
You need to clean the distiller before making water to drink or use.
1. Please remove the top and pour 2 liters of water into the stainless steel tank, then put the
top back on. Please fully insert the two power cords into the sockets on the distiller then
insert the main power cord into the wall outlet.
※
Note:
1
When the fan starts running, it means the distiller
is beginning
to heat up.
2
The RESET button on the distiller is factory-set at “ON” position, thus pressing the
RESET button to start the distiller is not necessary for the first time user. It always turns
itself off automatically when distillation is completed.
2. During each distillation, a water container (PP or glass bottle, or any other type of water
container) must be placed underneath the distiller nozzle to collect distilled water.
※
Do not drink the 2 liters water that is used to clean up the pipeline.
Starting-up
1. The RESET button serves only to start the machine
,
and after each distillation the machine
will
turn off
automatically.
2. Please press down the RESET button to start the
machine, when the fan starts running, it means the
distiller is starting to heat up.
3. Please disconnect the main power cord from the wall
outlet in order to stop the distiller during a distillation
process.
4. Please do not replace any part in the distiller in order
to avoid system failure.
5. For security reason, if the RESET button does not
work, (e.g., the RESET button has stuck, lose its
elasticity, or the power did not turn off automatically
after the distillation), please stop using the distiller
immediately and contact your local distributor for
repair.
