Mega MMP4, Maintenance Manual

Page: 38 / 96

MMP4-CAT(T4)-MX-2
26 Feb 2014
SECTION 8
Scheduled Inspections
8-3
FREQUENCY
STEP
WATER PUMP ASSEMBLY
DAILY EVERY 250 HOURS EVERY 500 HOURS
4
Remove water pump assembly from inlet boom and check for:
• Hydraulic drive motor security, damage and leaks.
• Bearing oil reservoir levels.
• Bearing oil reservoirs for contamination.
• Impeller damage.
• Water pump housing bolts for security, damage and missing
parts.Repair, adjust or replace as required.
X
5 Grease water pump suction bowl bearing.
X
6
Remove water pump from inlet boom and change bearing
reservoir oil.
X
FREQUENCY
STEP
ENGINE AND ENGINE CONTROL
DAILY EVERY 250 HOURS EVERY 500 HOURS
1
Refer to the correct engine Operation and Maintenance Manual
for required service intervals and procedures.Use SEBU8312 ‐ 02
for engine maintenance requirements.Follow and perform all
required service procedures, operations, conditions and
schedules.
X
2
Check and ensure all engine control functions are in proper
working order.Repair as required.
X
3
Check all engine safety guards for security, damage and missing
parts.Repair as required.
X
4
Check engine start battery and cables for security, damage,
corrosion, water level (if required) and condition.Repair as
required.
X
5
Check engine throttle control for security, damage and proper
operation.Repair as required.
X
6
Check engine control box for security, damage and proper
operation.Repair as required.
X
7
Check engine muffler and intake system for security, damage,
and condition.Repair as required.
X
8
Check diesel fuel level to ensure proper level to allow unit to run
for daily operation.Refill as required.
X
9
Check engine control cable for security and damage.Repair as
required.
X