Mega Lite Deco Drive IP, User Manual

Page: 9 / 11

Cleaning and Maintenance
Installation Maintenance: The operator has to make sure that the unit is operating safely and has the installations and
electronics checked by an expert every 2 years.
The following points have to be considered during the inspection:
1) All screws used for installing the device or part of the device have to be tightly connected and must not be corroded.
2) There must not be any deformations on the housing, fixation and installation spots (rack, suspension, trussing).
3) The electronic power supply cables must not show any damages, material fatigue (e.g. porous cables) or sediments.
Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any
safety problems have to be removed.
4) Cooling fins must be clear of any debris.
9
Rigging the Fixture
Caution!
1. The installation must be carried out by an authorized dealer or trained professional.
2. Unit may cause severe injures if you have doubts concerning the safety do not install.
3. Unit is to be 24inches away from flammable materials (decoration material)
4. Installation location must have adequate air flow.
5. M10 treaded mount is provided on the side of the fixture for clamp mount
When rigging a unit it is very important that you follow common safety procedures. Rigging requires extensive experi-
ence including but not limited to calculating working loads, material being used and periodic safety inspections. If you
lack these qualifications, do not attempt the installation yourself, instead use a professional structural rigger.
When rigging the unit always be secured with a secondary safety attachment. The installation location of the Fixture has
got to be built in the way that it can hold 10 times the weight for 1 hour without any failures. Installation should be
checked at least one time a year by a skilled person.
Parts List
Accessories
Item Number Description
5070 - ANT IP RATED ANTENA
5074 - FAN FAN
5074 - HOU - CEN CENTER HOUSING EXTRUSION
5074 - HOU - DIS DISPLAY SIDE HOUSING
5074 - HOU - MOU MOUNTING SIDE HOUSING
5074 - PCB - DIS DISPLAY PCB
5074 - PCB - DRI DRIVER PCB
5074 - PCB - WIR WIRELESS DMX PCB A40895 WDMX
CON - COL - DC5 IP 67 5 POLE PARALLEL CONNECTOR
5060 - DIN DIN RAIL MOUNTS
5060 - ADA 5PIN SCREW TERMINAL TO RJ45 ADAPTER
5060 - DIN (din rail mount) 5060 - ADA (not intended for outdoor use)