5
Control Board
Power
(Off)
Power
(On)
Unlock
(Yes)
Unlock
(No)
W
-
DMX
Power Off
Linking
Waiting
W
-
DMX
No Link
DMX Address
Press
Enter
to select the output Port use the
Up/Down
to select from 01 to 04
1 CH
2 CH
3 CH
Single Color Fixture
Variable White Color Fixture
3 Color Fixture, Red, Green, Blue
Wireless DMX
This function allows you to connect signal to the fixture using a wireless DMX connection. A Wireless Solution Transmit-
ter is required for this function to operate.
Menu
Enter
Up
Down
CONTROL BOARD
Mega Lite
Deco Drive IP
DMX
4 CH
7 CH
4 Color Fixture, Red, Green, Blue, White
4 Color Fixture, Dimmer, Red, Green, Blue, White, Strobe, Macro
WDMX Set
DMX Port
04
P04 Mode
(07)
Press
Enter
to select the Channel Mode use the
Up/Down
to select from options
below
P04 ADDR
(001)
Press
Enter
to select the DMX Start Channel use the
Up/Down
to select output
port DMX Start Channel. (Note if you want multiple output ports operating in the
same way just use the same Mode and Start Channel for what ever port you want
to work the same )
Press
Enter
and use the
Up/Down
buttons to engage or disengage
this function
Press
Enter
and use the
Up/Down
buttons to open communication
Mode Yes to open No to leave closed. Function Button on the wire-
less transmitter must be engaged for the communication to be sent
W
-
DMX
Status
Display Status of Wireless DMX connection Status. Display should
read (Linked) for proper Wireless connection
W
-
DMX
Linked
Summary of Contents for Deco Drive IP
Page 10: ...10...
