Laminate Your Value
16. Using Air knob, turn left to
lift down the upper roller, then
turn to the Neutral position.
20. Using Hot/Cold lamination switch,
pre-heating for the upper roller. Press SET
button, heat the upper roller (with
recommended temperature of 40-50
℃
for
heat-assist cold lamination or 90-100
℃
for
21. Using Hot/Cold lamination switch,
pre-heating for the lower roller.
23. Using Speed controller
depending on your needs.
14
15
17. Install cutters align blank
18. Install other cutters align
blank
19. Up air knob
22. Press the “Continue” switch
to laminate.
