MEFE—Mitchell Engineering Food Equipment Pty Ltd
23 Storie Street Clontarf QLD 4019 Australia
www.mefe.com.au | [email protected]
Page 4
+617 3283 4536
Free AU 1800 669 006
2. Abrasive Belt Installation
Firstly put the abrasive belt over the tension wheel and the impeller, then push the tension rack towards the driven wheel and
slip the belt over the driven wheel. Then fine tune the position of the belt over the three wheels.
2.1 Adjusting the Position of the Belt Holder
Place the Sharpener on a solid surface then press and hold the spring positioning pin and turn the Belt Holder to the angle that
is desired. Release the positioning pin and slot the Belt Holder into position.
Driven Wheel
Tension Wheel
Impeller
Tension Rack
Spring Positioning Pin
