10
Note:
The Windows 7 operating system does not have built-in Bluetooth
drivers; drivers are provided by the Bluetooth transmitter manufacturer.
Actual pairing and connecting process can vary depending on the
Bluetooth device drivers and computer configuration.
Pairing (Continued)
Windows 7 Computers and Laptops
Press on the Bluetooth icon in the notification area of your
taskbar and select
Add a Device
The Add a device popup window will appear with “Select a
device to add to this computer”
Make sure the Venture is off and within 1 meter of your device
Initiate pairing mode by holding the power button
for 7 seconds, until you hear “pairing.”
(Note: Pairing mode will be active for 2 minutes 30 seconds.
If no devices are paired within that time, the Venture will
return to standby mode.)
Wait until you see either “AF52” or “Bluetooth headset” in the
Searching for devices area
Select “AF52” or “Bluetooth headset” and press the Next button;
the Add a device popup will display “Connecting with this device”
When the computer is finished pairing with the Venture headset,
the Add a device popup will display “This device has been
successfully added to your computer”
On some computers, it can take a few minutes for the device
driver software to install completely, and a “Your device is ready
to use” notification will appear in the notification area;
other computers will not show this notification
If pairing is successful, continue to the next page.
If pairing fails, please repeat steps a) through h) above.
a)
b)
c)
d)
e)
f)
g)
h)
