Meech TakClean, Operating Manual

Page: 18 / 32

18
Maintenance - TransTak Elastomer Rollers
IMPORTANT
Always make safe the electrical and compressed air supplies before undertaking any maintenance work on the TakClean system.
IMPORTANT
Maintenance should only be completed on the TakClean system by those with suitable qualifications.
General Guidelines
To maximise the overall cleaning ability of the TakClean system, it is recommended that the TransTak elastomer rollers are kept
clean of contamination that the adhesive rolls are not designed to remove, such as solvent residue, oil or grease.
The TransTak rollers should be gently wiped over with a cloth that is moist with isopropyl alcohol.
It is recommended that the condition of the TransTak elastomer rollers is monitored and that cleaning is undertaken as required.
CAUTION
Do not soak the TransTak elastomer rollers in isopropyl alcohol and do not let the isopropyl alcohol contact the adhesive rolls or
other system parts.
Replacing the TransTak Elastomer Rollers
IMPORTANT
Monitor the condition of the TransTak rollers frequently. Upon signs of any deterioration be sure to change them, so that the
cleaning efficiency of the TakClean system is maximised. By following the instructions in this manual, the TransTak rollers will
have a long life span.
CAUTION
Be careful not to drop any fixing screws into the TakClean system when removing the TransTak rollers.
The top or bottom TransTak elastomer rollers can be replaced by following these steps:
1. Make sure the adhesive rolls are NOT engaged with the TransTak rollers.