Meech AHU-CL1, Operating Manual

Page: 8 / 102

AHU-CL1 Manual
Page 8 of 102
Safety Instructions
Before using equipment, read the following safety and operating instructions to ensure your own
personal safety and help to protect your equipment. Failure to do so could result in injury or death.
Connected equipment may require additional safety instructions. Observe all safety instructions for
additional equipment connected before operating.
General Safety
Before setting up the equipment:
•
Read the operating instructions carefully and ensure you understand how to correctly use the
equipment.
•
Installation and testing must only be completed by those suitably qualified.
•
Inspect the working environment and ensure it is clean and clear of hazards before removing
equipment from packaging and positioning the system.
•
Visually check all equipment for damage. If damaged, contact your local Meech representative
before continuing.
•
Ensure a full understanding of the symbols attached to the equipment before operating.
•
Keep all cables secured until ready for use.
•
Keep a copy of the Operating Manual close to the system at all times.
Electrical Safety
Before installing, performing repairs or maintenance on equipment, ensure the system is electrically
isolated. Failure of this could result in injury or death.
Before working on the equipment:
•
Check the equipment is electrically isolated correctly.
•
Check equipment and cables for damage. If damaged, contact your local Meech representative
before continuing.
•
Ensure all wiring is completed by competent persons.
•
Check all connections in relation to the wiring diagram