Meech AHU-CL1, Operating Manual

Page: 27 / 102

AHU-CL1 Manual
Page 27 of 102
Install the Side Slide Rails
The Side Slide Rails will come in a pair of two, one for the left side and one for the right. It is important
they are put on the correct way around or they will not function correctly. The bent powder coated
metal should be facing the inside of the mounting location as shown below
It will be obvious when mounting the slides if they are not on the correct side as they will need to be
opened to attach them to the frame rails
Each side rail has 3 mounting locations, to make these positions visible, open the slide. These locations
are dimensioned in the Technical Drawing section
at the rear of this Manual
Position the slide as far back in the machine as possible, this will align the 3 mounting holes that are
required to be fitted
Figure 37 – Pair of Side Slide Rails
Figure 38 - Side slide mounting holes
Figure 39 - Side Slide in position