Meech A70000, Operating Manual

Page: 20 / 24

20
Point is the temperature that once activated the system will cool the cabinet/panel
to (factory set to 22°C).
3. Once you have entered your Set Point press the ‘P’ button once. This will
activate the new setting and return you to the main toggle menu.
4. Using the 2 arrow buttons toggle through the parameters until you reach ‘HSEt’.
5. When you have reached ‘HSEt’ press the ‘P’ button once. This allows you
to adjust the differential of cooling. The differential is the number of degrees
above the set point that the unit will cool from (factory set to 8°C above a set
point of 22°C, meaning the unit will start cooling when the internal cabinet
temperature reaches 30°C).