ENGLISH
50
Important:
If engine runs out of fuel or has been stored for an extended period of
time, it may be necessary to prime 5 times.
Important:
Priming is usually unnecessary when restarting a warm engine.
Important:
If you push the primer too many times, an excessive amount of fuel will
flood the engine. This flooded
condition will make the engine difficult to start.
7. Stand behind the mower. Place one hand on the engine start/stop lever. Place the
other hand on the starter handle.
（
Fig. 18)
9. Start the engine using the reversing starter (Fig.1/Item 12). To do this pull the
handle approx. 10– 15 cm (until you feel a resistance) and then start the engine with
a sharp pull. If the engine does not start, pull the handle again.
Important!
Never allow the starter cord to snap back.
Note:
In cold weather, it may be necessary to repeat the starting process several
times.
Stopping
All you have to do to switch off the engine is release the engine start/stop lever
(Fig.18/Pos. O)
Warning: The blades continue to rotate for a while after the engine start/stop lever
has been released. Highly dangerous.
MAINTENANCE
The machine should be cold and the spark plug lead removed from the spark plug
before carrying out maintenance. Clean grass and dirt off the lawn mower. Wipe the
covers with a damp cloth.
Before using the machine, check:
1.
That all screws and nuts are tight.
2. That the blade attachment is properly tightened.
3. That the blade is not damaged.
4. That the blade is sharp.
