Meec 380-040, Operating Instructions Manual

Page: 35 / 40

ENGLISH
35
14. Fit the guard over the control handle.
15. Check the level in the hydraulic fluid tank.
16. Remove the dipstick.
17. Top up with hydraulic fluid if necessary to
that the level lies between the min and max
markings on the dipstick.
18. Replace and tighten the dipstick.
19. Run the piston all the way out and back a
few times to vent the tank.
NOTE:

The packaging must be recycled in accordance with local regulations.

Contact your dealer immediately if you discover any transport damage during the unpacking. Do
not use the machine if it is damaged.

Read all the instructions and safety instructions and all the warning labels on the machine prior to
assembly and use.

Save these instructions for future reference.

Switch off the machine and unplug the power cord before cleaning.
USE
Wiring diagram
A. Power cord
B. Power switch
C. Terminal block
D. Motor wire
E. Overheating protection
F. Main winding
G. Auxiliary winding
H. Capacitor