ENGLISH
37
Use
1.
Let the motor idle for a few minutes and then
switch off the machine. Allow the machine to
cool for about 15 minutes before switching it
on again to start working.
2.
Adjust to the required log length by releasing
the locking screw and running the piston to
the required position, and then tightening the
locking screw.
3.
Place the logs on top of the tank, between
the guides. Keep both control handles
pressed down until the log has been split
(fig. 7).
4.
The piston will stop if you release one of the
control handles.
5.
The piston will go back when you release
both control handles.
6.
Switch off the machine and unplug the
power cord after use.
NOTE:
Switch off the machine and unplug the power cord after use.
Place the machine at least 3 metres from the mains outlet, to protect the outlet from dust.
Never allow children, or persons who have not read and understood these instructions, to use the
machine.
Familiarise yourself with the controls on the machine and how to use them.. Learn how to stop the
machine quickly in an emergency.
Never use the machine when you are tired or under the influence of drugs, alcohol or medication.
The machine must only be used by one person at once. Keep onlookers, especially children, and
pets at a safe distance.
Never attempt to press the power switch or control handles with an object, or with any part of the
body apart from your hands, and never attempt to bind or force down the control handles – risk of
serious personal injury and/or death.
Never allow any parts of the body to come between the blade and piston.
Do not lean over, or try to step over the machine when it is switched on.
Only split logs parallel to the direction of the grain. Some types of wood can burst and/or be ejected
when splitting across the direction of the grain – risk of personal injury.
Release the control handles if the machine cannot split the log. Release both handles to run back
the piston. If the control handles are kept pressed down after the piston has stopped, the piston will
not go back when you release the handles. In which case, switch off the motor and then switch it
on again to continue.
Release the control handles immediately, switch off the machine and unplug the power cord if the
log fastens in the blade. Tap the log loose with a hammer. Do not use your hands.
Never attempt to split more than one log at once, unless the piston has fully gone out and you need
to use another log to completely split the first one. Never try to split several logs on top of each
other.
Clear away the split logs regularly, to keep the working area free.
Regularly check that all the screw and hydraulic connections are correctly tightened.
Never use the machine on slippery or unsafe surfaces – risk of personal injury.
Never leave the machine unattended when switched on.
Do not expose the machine to rain or moisture – risk of electric shock.
Summary of Contents for 380-040
Page 3: ...Maintenance 38 Storage 39...
Page 39: ......