20
Parallel cutting
To cut parallel along the long fence, set the fence as follows:
1.
Loosen the screw (A) in the figure below.
2.
Set the fence (B) at the required distance from the blade.
3.
Tighten the screw (A).
Before cutting, check that:
•
the fence is parallel to the blade.
•
the fence is secured firmly.
•
the fence is straight.
Small workpieces
Hold the workpiece firmly and slide it slowly towards the blade without forcing it forwards.
Your hands must not come too close to the saw blade. User the pusher provided if working with small
workpieces. See the figure below.
Stop the machine immediately if the workpiece gets caught in the machine.