EN
54
ASSEMBLY
ASSEMBLING THE PROTECTIVE GUARD.
1.
Fit the protective guard (8) on the trimmer head (3) using the screws (15) (figure 1).
ASSEMBLE THE LAWN TRIMMER
1.
Insert the upper trimmer section (2) in the lower trimmer section (1) until it clicks. Ensure to
inserted it facing in the right direction (figure 2).
2.
Insert the screws and screw firmly in place.
USE
INTENDED USE
The lawn trimmer is designed for trimming grass on smaller areas.
BEFORE USE
Mains connection
NOTE:
• Check that the voltage indicated on the tool’s rating plate, e.g. 220 V, corresponds with the
mains voltage and connect the trimmer to an earthed mains socket.
• Only use power cords and extension cords with a maximum combined length of 25 metres and a
cross section of at least 1.5 mm².
2 Lawn trimmer - upper section
7 Grass trimmer - lower part
6 Locking screw
8 Guard
9 Blade guard
10 Blade
15 Screw ST 4.2 x 18
17 Locking button
1
2
7
17
6
2