Meec tools 721-301, User Instructions

Page: 37 / 41

GB GB
66 67
Fitting the of shoulder strap
1� Snap the buckle shut�
2� Adjust the length of the shoulder strap using the sliding buckle� Make the shoulder strap as
long as you need for a comfortable working posture�
3� Lay the shoulder strap over the right shoulder� Carry the equipment on your right side�
4� To take the shoulder strap off, press down on both sides of the buckle and pull the shoulder
strap away�
WARNING! Never hang the equipment in the strap diagonally over the shoulder and chest� Always
hang it instead on one shoulder� That way you can take the equipment off quickly should something
happen�
Assembling hedge cutter without telescopic pole
1� Open the quick release telescope coupling on the engine part�
2� Insert the rear handle part into the bracket on the engine part�
3� Close the quick release coupling again�
1� Blades
2� Guard
3� Front handle
4� Angle adjustment button
5� Quick release telescope coupling
6� Cable restraint
7� Switch on the rear handle
8� Locking ring for telescopic pole adjust-
ment
9� Starting lock
10� Telescopic pole
11� Quick release telescope coupling
12� Shoulder strap
13� Cable
14� Blade guard
15� Switch on the front handle
16� Rear handle
ASSEmBLY
Fitting the telescopic pole
1� Open the quick release telescope coupling on the telescopic pole�
2� Insert the rear handle part into the bracket on the telescopic pole�
3� Close the quick release coupling again�
4� Open the quick release telescope coupling on the engine part�
5� Insert the telescopic pole into the bracket on the casing�
6� Close the quick release coupling again�