GB
35
MEASURING
SINGLE MEASUREMENT
If the
button is pressed when the instrument is already switched on, this will activate
the laser� Aim the laser beam at the object to be measured and press�
the button
again to trigger a single measurement� The result is then displayed as shown in the
diagram on the right�
CONTINUOUS MEASURING
If the
button is pressed for a few seconds when the instrument is already switched on
this will activiate continuous measuring, where min is the minimum measured value and
max is the largest measured value� The instantaneous value is displayed on the bottom
line, as shown in the diagram on the right�
FUNCTIONS
Area measurement
Volume measurement
Press the
button to switch between measurement functions� Select the required function and start
measuring�
MEASUREMENT FUNCTION
SYMBOL/MEASUREMENT SEQUENCE
Area measurement
Volume measurement
