ENGLISH
18
DESCRIPTION
1. Power
switch
2.
Unit with belts and pulleys
3. Drive
centre
4. Bed
rails
5. Tool
rest
6.
Tool rest holder
7.
Tool rest locking screw
8.
Tailstock spindle (with ball bearing centre)
9.
Tailstock spindle lock nut
10. Tailstock
11.
Tailstock lock nut
OPERATION
Changing speed
1.
Disconnect the machine from the mains.
2.
Loosen the motor mounting bolts under the
housing.
3.
Lift the drive pulley to loosen the belt.
4.
Place the belt in a suitable position over the
drive pulleys for the speed you require.
5.
Press down the drive pulley.
6.
Tighten the motor mounting bolts.
Moving the tailstock and tool rest
The tailstock and tool rest are held to the bed with
lock nuts underneath the bed rails. To move them
to a new position, loosen the lock nut with a
spanner, move the unit along the bed to the
required position and tighten the lock nut. The tool
rest is held in place with the lock knob.
